BRUDERER UK | High Speed Mechanical Stamping Presses | SWISS MADE All Presses – Bruderer

All Presses

  • ,

    BPG Planetary Gearbox 3 in 1 Press

    The 3 in 1 solution from BRUDERER – tool test press, servo motion press and high performance stamping machine. With the planetary gear, the speed is freely selectable from one stroke per minute. Even at minimum speed you work with 100% power.
    Features:
    • High-performance stamping machine and test press in one
    • Manual operation for stamping machine
    • Test operation with lowest stroke rates using the full press force
    • Easy adjustment of the ram height by hand operation
    • Display of the relevant measured values on the manual control (press force, distance to bottom dead center)

    Customer benefits:
    • Test tool in normal punching operation with original forces and retract
    • Manual operation of the stamping machine
    • Precise control allows easy setup and optimum tool development
    • Easier testing of tools and materials
    • No discrepancies – development and production personnel use the same machine

  • ,

    Bruderer BSTA 25H press

    One used Bruderer BSTA 25 high speed punching press.
    25 tons nominal capacity.
    Adjustable stroke 13 to 38 mm.
    Speed range 100 to 1500 SPM max.
    Bolster area 540 mm x 530 mm.
    Fitted with a single roll feed BBV 202/120 on right-hand side.
    Max width of strip 200 mm.
    Feed pitch 120 mm, feed angle 180°.
    Electrical control cabinet.
    Oil cooler.
    Air damper feet

    Machine speed range stated is approximate; production rates are dependent on load, material and component configuration.

  • ,

    Bruderer BSTA 25UL press

    One used Bruderer BSTA 25UL high speed punch press.
    Year of manufacture 1996
    Nominal capacity 25 tons (250 kN)
    Adjustable stroke 13 – 38 mm.
    Speed range 100 to 1425 strokes per minute max.
    Bolster area 640 mm x 530 mm.
    Fitted with roll feed BBV 190/85 on left-hand side.
    Max width of strip 190 mm. Feed angle 180 °
    Weight of press approx. 4900 kgs.
    Front and rear safety guards.
    Spring dampers
    Oil cooler
    Bruderer U-control operating system

    Power supply 400 Volt, 50 Hz.

  • ,

    Bruderer BSTA 30 Press

    Used Bruderer BSTA 30 high speed punching press.
    30 tons nominal capacity.
    Adjustable stroke 8 – 40 mm.
    Speed range 100 to 600 SPM max.
    Bolster area 480 x 450 mm
    Upper ram plate Dia. 250 mm
    Fitted with a single roll feed BBV120/60
    Max width of strip 120 mm.
    Feed pitch 0-60 mm
    Electrical control cabinet.

    Machine speed range stated is approximate; production rates are dependent on load, material and component configuration.

  • ,

    Bruderer BSTA 50H press

    One used Bruderer BSTA50 H high speed punch press.
    Year of Mfg 1983. Partially refurbished 2015.
    50 tons (500 kN) nominal capacity.
    Adjustable stroke 16 to 51 mm.
    Speed range 100 to 1200 SPM max.
    Bolster area 760 mm x 650 mm.
    Fitted with single roll feed BBV 202/120 on left-hand side.
    Max width of strip 200 mm.
    Electrical control cabinet.
    Oil cooler. Spring feet.
    Power supply 380 Volt, 50 Hz.
    Weight of machine approx 8000 kgs.

  • ,

    Bruderer BSTA 60HSL press

    One used Bruderer BSTA 60HSL high speed punch press,

    60 metric tons capacity, underdrive. Swiss origin.

    Adjustable stroke 20 to 76 mm.

    Speed range 100 to 700 strokes per minute max.

    Bolster (tool clamping) area 920 mm x 620 mm.

    Double Roll feeds BBV 300/200, feeding direction left to right.

    Max width of strip 300 mm.

  • ,

    BSTA 1250

    • High performance stamping press with perfected mass balancing system and adjustable stroke
    • Press force 1250 kN
    • Speeds ranging from 100 to 850 spm
    • Modular design in 3 versions
    • Bolster plate dimensions:
      • BSTA 1250-117: 1150 x 1070 mm
      • BSTA 1250-151: 1490 x 1070 mm
      • BSTA 1250-181: 1790 x 1070 mm
    • Control based on IPC, high-quality TFT display with long service life and even illumination for good readability even under difficult lighting
    • Integrated safety control
    • Signal transmission to the stamping press via EtherCAT bus system
    • Precision mechanics, versatile – can be used for a number of different applications, optimum cost-benefit ratio
  • ,

    BSTA 1600

    • High performance stamping press with perfected mass balancing system and adjustable stroke
    • Press force 1600 kN
    • Speeds ranging:
      • BSTA 1600-117: 100 – 825 spm
      • BSTA 1600-151: 100 – 800 spm
      • BSTA 1600-181: 100 – 800 spm
      • BSTA 1600-220: 100 – 760 spm
    • Modular design in 4 versions
    • Bolster plate dimensions:
      • BSTA 1600-117: 1150 x 1070 mm
      • BSTA 1600-151: 1490 x 1070 mm
      • BSTA 1600-181: 1790 x 1070 mm
      • BSTA 1600-220: 2200 x 1070 mm
    • Control based on IPC, high-quality TFT display with long service life and even illumination for good readability even under difficult lighting
    • Integrated safety control
    • Signal transmission to the stamping press via EtherCAT bus system
    • Precision mechanics, versatile – can be used for a number of different applications, optimum cost-benefit ratio.
  • ,

    BSTA 180

    • High precision automatic stamping press in single connecting rod design and adjustable stroke
    • Press force 180 kN
    • Speeds ranging from 100 to 1400 spm
    • Optimum utilization of punching area with a tool loading area L–R of 359 mm
    • Control based on IPC, high-quality TFT display with long service life and even illumination for good readability even under difficult lighting
    • Integrated safety control
    • Signal transmission to the stamping press via EtherCAT bus system
    • Precision mechanics, versatile – can be used for a number of different applications, optimum cost-benefit ratio

  • ,

    BSTA 200

    • High performance stamping press with perfected mass balancing system and adjustable stroke
    • Press force 200 kN
    • Speeds ranging:
      • Adjustable stroke machine (standard): 100 – 1800 spm
      • Adjustable stroke machine (option): 100 – 2000 spm
    • Modular design in 2 versions
    • Bolster plate dimensions:
      • BSTA 200-60: 590 x 426 mm
      • BSTA 200-70: 690 x 426 mm
    • Control based on IPC, high-quality TFT display with long service life and even illumination for good readability even under difficult lighting
    • Integrated safety control
    • Signal transmission to the stamping press via EtherCAT bus system
    • Precision mechanics, versatile – can be used for a number of different applications, optimum cost-benefit ratio
  • ,

    BSTA 2500

    • High performance stamping press with perfected mass balancing system and fixed stroke
    • Press force 2500 kN
    • Speeds ranging from 100 to 750 spm
    • Bolster plate dimensions:
      • BSTA 2500F-270: 2550 x 1350 mm
    • Control based on IPC, high-quality TFT display with long service life and even illumination for good readability even under difficult lighting
    • Integrated safety control
    • Signal transmission to the stamping press via EtherCAT bus system
    • Precision mechanics, versatile – can be used for a number of different applications, optimum cost-benefit ratio.
  • ,

    BSTA 280

    • High performance stamping press with perfected mass balancing system and adjustable stroke
    • Press force 280 kN
    • Speeds ranging:
      • Adjustable stroke machine (standard): 100 – 1500 spm
      • Adjustable stroke machine (option): 100 – 2000 spm
    • Modular design in 2 versions:
    • Bolster plate dimensions:
      • BSTA 280-75: 740 x 536 mm
      • BSTA 280-88: 870 x 536 mm
    • Control based on IPC, high-quality TFT display with long service life and even illumination for good readability even under difficult lighting
    • Integrated safety control
    • Signal transmission to the stamping press via EtherCAT bus system
    • Precision mechanics, versatile – can be used for a number of different applications, optimum cost-benefit ratio