SEMI-AUTOMATIC MPR’S – DESIGNED FOR HORIZONTAL, HIGH VOLUME REWINDING IN YOUR STAMPING, PLATING, OR MOLDING LINE
Rewinding can be done either with or without the Standard Paper Interleaf. If using Interleaf, the operator performs the threading function of the material strip and paper interleaf to the winding core. The number of terminals per coil is pre-programmed on the press counter. When the pre-set number is reached, the press/winder stops and a flashing light alerts the operator to perform a layer change. A plastic disc is placed on top of the last layer and the process is repeated.
Standard Features include Paper Interleaf Assembly with an adjustable paper brake, adjustable guide pulley push button (up/down), and adjustable material guide.
Automatic Layer Rewinder
CAPABLE OF CONTINUOUS OPERATION
With little operator assistance. This Winder “layer” fills each reel to a predetermined level, then advances to the next consecutive empty spool to continue its winding cyle.
High Speed Electronic Counter, Programmable Index Cutting, Adjustable Light Beam Terminal Counter, Adjustable Material Guides, Pneumatically Operated Material Cutter, and Adjustable Material Chutes.
Manual Layer Re-Winder
Once preset for a winding range, this Basic unit will fill each reel until it is either stopped by the operator or a tight loop condition develops. As the tight material strip forces the dancer arm to elevate, it signals the dancer’s arm/proximity sensor to change the winding speed or stop the winding process.
IDEALLY SUITED FOR CONTINUOUS STAMPING, PLATING, AND MOLDING
Ideally Suited for Continuous Stamping, Plating, and Molding
These compact, high-speed units perform automatic reel changes based upon the programmed number of parts per pancake spool. Paper Interleaf, Non-contact Infrared Loop Control, Sample Part Ejection, and Storage Tray, Job Storage, and High-Speed Parts Counter are just some of the standard features on these units.
Operator interface is minimal. These units automatically thread the material and index from full reel to empty, as well as wrap the full reels with interleaf in preparation for removal. A sample is cut between parts and ejected before the cycle repeats.
These Rewind Reels were designed originally to be used in the electronics industry to handle delicate, prefinished or stamped materials without stretching, deforming, or damaging the strip in any way.
Many configurations are possible. Different options include sensor choices, stock detectors, spool spreaders, longer drive mandrels, and magnetic brakes. Accumulators can be incorporated into your unit.