BRUDERER UK | High Speed Mechanical Stamping Presses | SWISS MADE Shears & Scrap Choppers – Bruderer

Shears & Scrap Choppers

  • Air Scrap Choppers

    PNEUMATICALLY POWERED
    Using the same principle as our Ram Driven Mechanical Scrap Chopper, this pneumatically powered chopper is designed to shear scrap material from .004″ (0.1mm) to .074″ (1.8mm) thick mild steel.

    A powerful double-acting cylinder provides controlled chopping while integral dampeners absorb snap through shock. The top blade, made of high chrome tool steel, chops nearly any kind of material

  • J300.800

    CHARACTERISTICS
    • Complete with direct mounted 5/2-way solenoid valve
    • Including Silencer, Guard and material guide plates
    DIMENSIONS
    • Standard width 60 mm
    • Maximum material thickness 2 mm

  • Mechanical Scrap Chopper

    UNIQUE HELICALLY GROUND BLADE
    These units chop a wide variety of material, from paper to cold-rolled steel without adjustment. Once installed, any number of stock thicknesses can be fed into the chopper without any additional set-up time. The reel-type scissor action reduces off-center loading by chopping a width of only 14 times the maximum material thickness at one time regardless of total stock width.

  • Pneumatic Stock Cutter

    CAN BE USED IN CUT-TO-LENGTH APPLICATIONS
    When fed by a programmable Servo Feed or Air Feed. Mounted on a press, it serves as a scrap cutter or part cutoff. Pneumatically powered, these Stock Cutters are designed to shear material at full width. The powerful air cylinders have a pancake profile for High Speed Operations. The Four-Way Solenoid valve controls the sequencing and can be synchronized with a press.
    Both upper and lower blades are vertically adjustable for wear compensation and sharpening. The lower blade is also horizontally adjustable to provide the correct blade clearance necessary to cut different materials. No other stock cutter has both of these features.
    Note: Input power is 120 VAC, Single Phase, 50/60 Hz. Other voltages available, 240 VAC, 24 VDC.

  • PTS 120 / 220

    CHARACTERISTICS
    • Dynamic impact triggering
    • Column guides with ball bushings
    • Including Silencer, protection screen and material guide plates
    DIMENSIONS
    • Standard widths 120 mm and 220 mm; upon request 320mm
    • Strip cross section up to 100 mm2
    • Maximum material thickness 4 mm

  • TSX-P

    INNOVATIONS
    • Solid pillar guides with ball bushings
    • Easier and preciser cutting gap setting
    • Better elimination of chopped waste thanks ameliorated outlet
    • Optimized access for cleaning and exchange cutter
    CHARACTERISTICS
    • Dynamic impact triggering
    • Column guides with ball bushings
    • Including Silencer, protection screen and material guide plates
    DIMENSIONS
    • Standard widths 160 mm and 320 mm
    • Maximum material thickness 7 mm